Real Wood Layer
4mm real oak wear layer (other products on the market usually have around 2.5mm of oak). This means you will get several sands out of it as you would a solid wood floor.
4mm real oak wear layer (other products on the market usually have around 2.5mm of oak). This means you will get several sands out of it as you would a solid wood floor.
Ply sub-layer
Greatly increases stability. Reduces the possibility of issues such as cupping, bowing and shrinkage often associated with solid wood floors.
Greatly increases stability. Reduces the possibility of issues such as cupping, bowing and shrinkage often associated with solid wood floors.
15mm overall thickness
Equivalent to many solid wood flooring types. Can be used with most types of under floor heating systems unlike solid wood flooring (please refer to our installation guidelines when installing with underfloor heating)
Equivalent to many solid wood flooring types. Can be used with most types of under floor heating systems unlike solid wood flooring (please refer to our installation guidelines when installing with underfloor heating)
Pre-finished with UV coating
Prefinished boards come already finished with a UV protective coating and requires no further finishing after installation.
Prefinished boards come already finished with a UV protective coating and requires no further finishing after installation.
Specification:
- Three pre-finishes available – natural, blonde and moscato.
- 15mm thick boards include:
- 4mm solid European Oak layer – AB Grade or prime grade oak. As the wood is cut from the centre of the log, AB grade oak will contain very few knots and the ones that do appear will be small. There will also be less colour variation and more of a uniform look.
- 11mm ply substrate for stability.
- All boards are 190mm wide.
- All boards are 1860mm long (*with up to 25% short lengths)
- Tongue and groove to all 4 edges of each board for further stability.
Why use an Engineered timber floor?
- Strength and Durability – compared to solid timber floors, engineered floors offer greater stability.
- Time Saving – our pre-finished boards are finished with UV resistant lacquer and requires no further finishing after installation. This saves time in the finishing process for your home and ensures consistency throughout.
- Easy to Install – the flooring will arrive boxed in manageable sizes and ready to install. It can be either direct stick or laid onto timber joists (depending on joist centres).
- Compatible with hydronic under floor heating – unlike solid timber floors, engineered timber flooring is stable with underfloor heating under controlled conditions.
